PH 04-M5 | 4mm O.D Tube, M5 x 0.8 Thread Male Banjo | Push to Connect Fitting
4mm tube M5 x 0.8 thread male banjo push to connect fitting is widely used to connect a tubing at a 90 degree angle to a female threaded port at a narrow space. Tightening on the top of the male banjo push in fitting with a flat wrench or a socket wrench at a confined space. equipped with a convenient one touch release button that provides a easy and quick tubing connection and disconnection. Working pressure is 0-1MPa.
Push-in Tubing O.D: 4mm
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €0.572
Male Banjo Elbow Pneumatic Air Fitting M5 Thread 4mm Tube, 4mm Tubing to M5 Male Banjo Elbow Tubing Fitting, M5 x 0.8 Thread to 4mm Male Banjo Push in Tube Fitting, 4mm Tube M5 x 0.8 Thread Male Banjo Push to Connect Fitting, Male Banjo Push in Tube Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PH Male Banjo
