PBF 04-M6 | 4mm O.D Tube, M6 x 1 Thread Female Branch Tee | Pneumatic Fitting
4mm tube M6 x 1 thread female branch tee pneumatic fitting is used for connecting pneumatic plastic tubing in compressed air circuits. The pneumatic tubing can be PU tubing, teflon tubing, nylon tubing and PE tubing. Male branch tee is commonly used for the connection of two plastic tubes at a 90 degree angle to a male threaded port. External tightening the male branch tee push in fitting with a flat wrench.
Push-in Tubing O.D: 4mm
Thread Size: M6 x 1
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickle Plated Brass
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: M6 x 1
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickle Plated Brass
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $0.617
Female Branch Tee Pneumatic Connector 4mm Tubing to M5, Push to Connect Fitting Female Branch Tee M5 Thread to 4mm Tube, 4mm Tubing M5 Thread Female Branch Tee One Touch Tube Fitting, 4mm Tube M6 x 1 Thread Female Branch Tee Pneumatic Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PBF Female Branch Tee
