PZA-06 | 6mm O.D Tube to 6mm O.D Tube Union Cross | Pneumatic Connector
6mm O.D tube to 6mm O.D tube union cross pneumatic connector is used to connect together four tubes in all 90° directions. All tubing connections are of the same diameter. Union cross push in fitting is easy to install and release. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. The stainless collect design offers a secure connections that hold the tube firmly. Oval shape release sleeve and round shape release sleeve can be selection.
Push-in Tubing O.D: 6mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €0.683
6mm O.D Tube to 6mm O.D Tube Union Cross Pneumatic Connector, Union Cross Push in Fitting, 6mm to 6mm Union Cross Push to Connect Fitting, One Touch Tube Fitting Union Cross 6mm O.D
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PZA Union Cross