PY-3/8 | 3/8 Inch O.D Tube to 3/8 Inch O.D Tube Union Y | Plastic Push to Connect Fitting
3/8 inch O.D. tube to 3/8 inch O.D. tube union tee plastic push to connect fitting is used to connect three tubes of the same diameter for dividing air distribution, which can be fitted quickly and simply by pushing the tube directly. To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. The pneumatic plastic tubing connection can be polyurethane (PU) tube, polyethylene (PE) tube, nylon (nylon) tube and teflon (PTFE) tubing.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Union Y Plastic Push to Connect Fitting 3/8 Inch O.D Tube, 3/8" - 3/8" Tubing Push in Hose Fitting Union Y, Pneumatic Air Fitting Union Y 3/8 o.d. Hose, 3/8 Tube to 3/8 Tube Union Y Pneumatic Push in Fitting