PVG 5/16-1/4 | 5/16 Inch O.D Tube to 1/4 Inch O.D Tube Union Elbow Reducer | Pneumatic Fitting
5/16 inch O.D tube to 1/4 inch O.D. tube union straight reducer pneumatic fitting is used to connect two tubings with different tubing diameter on both ends at a right angle. Pneumatic push in fitting union elbow reducer is used for connecting pneumatic plastic tubing in compressed air circuits. The pneumatic plastic tubing connection can be polyurethane (PU) tube, polyethylene (PE) tube, nylon (nylon) tube and teflon (PTFE) tubing. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. Working pressure is 0-1MPa.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
5/16 Tube to 1/4 Tube Union Elbow Reducer Pneumatic Fitting, Pneumatic Push in Fitting Union Elbow Reducer, Union Elbow Reducer Push to Connect Fitting 5/16" Hose - 1/4" Hose, Ait Tube Fitting Union Elbow Reducer 5/16 Inch Tube to 1/4 Inch Tube