PVG 3/8-5/16 | 3/8 Inch O.D Tube to 5/16 Inch O.D Tube Union Elbow Reducer | Pneumatic Fitting
3/8 inch O.D tube to 5/16 inch O.D. tube union elbow reducer pneumatic fitting is used to connect two tubings with different tubing diameter on both ends at a right angle. Push in tube fitting union elbow reducer is widely used in pneumatic applications and tubing systems. To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. Quick and simple tube connection and disconnection in tubing systems.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
3/8 Tube to 5/16 Tube Union Elbow Reducer Pneumatic Fitting, Push in Tube Fitting Union Elbow Reducer, Push to Connect Fitting Union Elbow Reducer 3/8" to 5/16" O.D. Hose, Air Tube Fitting Union Elbow Reducer 3/8" Hose - 5/16" Hose