PVG 1/2-3/8 | 1/2 Inch O.D Tube to 3/8 Inch O.D Tube Union Elbow Reducer | Push in Fitting
1/2 inch O.D tube to 3/8 inch O.D. tube union elbow reducer push in fitting is used to connect two tubings with different tubing diameter on both ends at a right angle. Pneumatic push to connect fitting union elbow reducer equipped with a convenient one touch release button that provides a easy and quick tubing connection and disconnection. Very easy to push in and pull out of the tube without tools help. Oval shape release sleeve and round shape release sleeve can be selection. The stainless steel collet design ensures superior clamping with various types of tubing such as polyethylene, polyurethane, nylon and teflon.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
1/2 Tube to 3/8 Tube Union Elbow Reducer Push in Fitting, Pneumatic Push to Connect Fitting Union Elbow Reducer, One Touch Tube Fitting Union Elbow Reducer 1/2" O.D. Tubing - 3/8" O.D. Tubing, Union Elbow Reducer Air Connector 1/2 to 3/8 Hose O.D.