PV-10 | 10mm O.D Tubing to 10mm O.D Tubing Union Elbow | Pneumatic Tube Fitting
10mm to 10mm O.D tubing union elbow pneumatic tube fitting is used to connect two tubes with equal tubing diameter on both ends at a right angle. The pneumatic plastic tubing connection can be PU tubing, teflon tubing, nylon tubing and PE tubing. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. Working pressure of union elbow push in fitting is 0-1MPa.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €0.487
10mm Tube to 10mm Tube Union Elbow Push in Fitting, 10mm Tube Union Elbow Push to Connect Fitting, 10mm O.D Union Elbow One Touch Tube Fitting, 10mm to 10mm O.D Tubing Union Elbow Pneumatic Tube Fitting, Union Elbow Push to Connect Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PV Union Elbow
