PV-1/8 | 1/8 Inch O.D Tube to 1/8 Inch O.D Tube Union Elbow | Push to Connect Fitting
1/8 inch O.D. tube to 1/8 inch O.D. tube union elbow push to connect fitting is used to connect two tubes with equal tubing diameter on both ends at a right angle. Pneumatic one touch fitting is easy to install and release. To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. Oval shape release sleeve and round shape release sleeve can be selection.
Push-in Tubing O.D: 1/8"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €0.561
1/8 Inch to 1/8 Inch Tube Union Elbow Push to Connect Fitting, Pneumatic One Touch Fitting, 1/8" Tube - 1/8" Tube Pneumatic Push in Fitting Union Elbow, Tubing Air Connector Elbow Union 1/8 Inch Tubing
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PV Union Elbow