PU-5/32 | 5/32 Inch O.D Tube to 5/32 Inch O.D Tube Union Straight | Plastic Push in Fitting
5/32 inch O.D tube to 5/32 inch O.D tube union straight plastic push in fitting is used to connect two tubes with same tube diameter on both ends for an inline air connection, which can be fitted quickly and simply by pushing the tube directly. The pneumatic plastic tubing connection can be polyurethane (PU) tube, polyethylene (PE) tube, nylon (nylon) tube and teflon (PTFE) tubing. To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
5/32 Inch O.D Tube Union Straight Plastic Push in Fitting, 5/32" - 5/32" O.D. Hose Push to Connect Fitting Union Straight, Pneumatic One Touch Fitting 5/32" Tubing Union Straight, 5/32" O.D. Tube Connector Union Straigh