PM-04 | 4mm O.D Tube to 4mm O.D Tube Bulkhead Union | Push in Fitting
4mm O.D tube to 4mm O.D tube bulkhead union push in fitting is used to connect two tubes on both ends through a panel or other barrier in straight line. The pneumatic plastic tubing connection can be PU tubing, teflon tubing, nylon tubing and PE tubing. The stainless collect design offers a secure connections that hold the tube firmly. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Push-in Tubing O.D: 4mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €0.886
4mm O.D Tube to 4mm O.D Tube Bulkhead Union Push in Fitting, One Touch Tube Fitting Bulkhead Union, 4mm to 4mm Bulkhead Union Pneumatic Connector, Bulkhead Union Straight 4mm Tube to 4mm Tube
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PM Bulkhead Union