PLM-1/4 | 1/4 Inch O.D. Tube to 1/4 Inch O.D. Tube Bulkhead Union Elbow | Push in Fitting
1/4 inch tube to 1/4 inch tube bulkhead union elbow push in fitting is basically designed to connect two tubes in right-angled through a panel. Working pressure is 0-1MPa. Pneumatic push to connect fitting can be fitted quickly and simply by pushing the tube directly. The stainless collect design offers a secure connections that hold the tube firmly. The pneumatic plastic tubing connection can be polyurethane (PU) tube, polyethylene (PE) tube, nylon (nylon) tube and teflon (PTFE) tubing.
Push-in Tubing O.D: 1/4"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $1.448
1/4 Inch O.D. Tube Bulkhead Union Elbow Push in Fitting, Tube Fitting Bulkhead Elbow Union 1/4" O.D. Tubing, Pneumatic Push to Connect Fitting Bulkhead Union Elbow 1/4 Tube to 1/4 Tube, 1/4" O.D. Hose One Touch Tube Fitting Pneumatic Bulkhead Union Elbow
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PLM Bulkhead Union Elbow