PLM-1/2 | 1/2 Inch Tube to 1/2 Inch Tube Bulkhead Union Elbow | Push in Fitting
1/2 inch to 1/2 inch tube bulkhead union elbow push in fitting is basically designed to connect two tubes in right-angled through a panel. Very easy to push in and pull out of the tube without tools help. The stainless steel collet design ensures superior clamping with various types of tubing such as polyethylene, polyurethane, nylon and teflon. Working pressure is 0-1MPa.
Push-in Tubing O.D: 1/2"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $3.111
1/2 Tube to 1/2 Tube Bulkhead Union Elbow Push in Fitting, Pneumatic Push to Connect Fitting Bulkhead Elbow Union 1/2" to 1/2" Tubing, One Touch Fitting Pneumatic 1/2 Tubing to 1/2 Tubing, 1/2" -1/2" O.D. Hose Bulkhead Elbow Union Tube Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PLM Bulkhead Union Elbow