PLL 12-03 | 12mm O.D. Tube, PT, R, BSPT 3/8 Thread Extended Male Elbow | Pneumatic Connector
12mm tube PT, R, BSPT 3/8 thread extended male elbow pneumatic connector is used for avoiding two-level tubings interfering with each other, which provides added height to meet requirements of tubing installation. Oval shape release sleeve and round shape release sleeve can be selection. Working pressure of extended male elbow is 0-1MPa. Teflon-coating on the thread for sealing.
Push-in Tubing O.D: 12mm
Thread Size: PT, R, BSPT 3/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: PT, R, BSPT 3/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $2.837
12mm Hose to R 3/8 Thread Extended Male Elbow One Touch Tube Fitting, 12mm 3/8 BSPT Pneumatic Push in Fitting Extended Male Elbow, Push to Connect Fitting Extended Male Elbow 12mm Tube to R 3/8, 12mm Tube to PT 3/8 Extended Male Elbow Pneumatic Connector, Pneumatic Push in Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PLL Extended Male Elbow