PL 08-04 | 8mm O.D Tube, PT, R, BSPT 1/2 Thread Male Swivel Elbow | Pneumatic Fitting
8mm tube PT, R, BSPT 1/2 thread male swivel elbow push in fitting is widely used to connect inline tubing to a female threaded port at 90° angle. Teflon-coating on the thread for sealing when connect the threaded port. Easily to connect and disconnect with the pneumati tubings, the tubings can be PU tubings and nylon tubings, PTFE tubings and PE tubings.
Push-in Tubing O.D: 8mm
Thread Size: PT, R, BSPT 1/2
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: PT, R, BSPT 1/2
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $1.433
8mm Tubing R 1/2 Thread Male Elbow Push to Connect Fitting, Pneumatic Push in Fitting Male Elbow 8mm Tube to 1/2 Thread, Pneumatic Connector Male Swivel Elbow 8mm Push in Tube to PT 1/2 Thread, 8mm Tube BSPT 1/2 Thread Male Swivel Elbow Pneumatic Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PL Male Elbow
