PL 08-01 | 8mm O.D Tube, PT, R, BSPT 1/8 Thread Male Swivel Elbow | Push in Fitting
8mm tube PT, R, BSPT 1/8 thread male swivel elbow push in fitting is widely used to connect inline tubing to a female threaded port at 90° angle. The shape of release sleeve can be oval shape and round shape. The body of male elbow is made of nickel plated brass and PBT plastic. Easily to connect and disconnect with the pneumati tubings. To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Thread Size: PT, R, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
8mm Tubing R 1/8 Thread Male Elbow Pneumatic Tube Fitting, Pneumatic Push in Fitting Male Elbow 8mm to BSPT 1/8 Thread, Pneumatic Connector Male Swivel Elbow 8mm Push in Tube to PT 1/8 Thread, 8mm Tube to BSPT 1/8 Thread Male Swivel Elbow Push in Fitting
