PL 06-M5 | 6mm O.D Tube, M5 x 0.8 Thread Male Swivel Elbow | Pneumatic Fitting
6mm tube M5 x 0.8 thread male swivel elbow pneumatic push in fitting is easily to install with the equipments and connect the pneumatic tubings, such as PU tubings, nylon tubings, teflon tubings and PE tubings. Teflon-coating on the thread for sealing when connecting the threaded port. The body of male elbow is made of nickel plated brass and PBT plastic. Working pressure is 0-1.0MPa (0-150psi).
Push-in Tubing O.D: 6mm
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: O-ring
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $0.588
6mm Tubing to M5 x 0.8 Thread Pneumatic Tube Fitting Male Elbow, Push to Connect Fitting Male Swivel Elbow 6mm Tube to M5 Thread, 6mm Tube M5 Thread Push in Tube Fitting Male Elbow, 6mm Tubing to M5 Thread Male Swivel Elbow Pneumatic Fitting, Push in Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PL Male Elbow
