PKB 08-04 | 8mm O.D Tubing, PT, T, BSPT 1/2 Thread Male Triple Branch | Pneumatic Connector
8mm tube to PT 1/2 male triple branch pneumatic connector is designed for use with compressed air and are not suitable for any other gases or liquids. The male triple branch is used for connecting a tube and female threaded port inline with three tube branches at a right angle. The pneumatic plastic tubing can be PU tubing, teflon tubing, nylon tubing and PE tubing. External tightening the male triple branch push in fitting with a flat wrench.
Push-in Tubing O.D: 8mm
Thread Size: PT, R, BSPT 1/2
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: PT, R, BSPT 1/2
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €2.983
8mm PT 1/2 Male Triple Branch Push in Tube Fitting, Male Triple Branch Pneumatic Fitting 8mm to BSPT 1/2 Thread, 8mm Tube R 1/2 Thread Male Triple Branch Tubing Fitting, 8mm Tube to PT 1/2 Male Triple Branch Pneumatic Connector, Male Triple Branch Push in Tube Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PKB Male Triple Branch
