PHF 06-M6 | 6mm O.D Tube, M6 x 1 Thread Female Banjo | Pneumatic Air Fitting
6mm O.D tube to M6 thread female banjo pneumatic air fitting is widely used to connect a tubing at a 90 degree angle from a female threaded port and male threaded port. Tightening on the top of the female banjo push in fitting with a flat wrench. Working pressure is 0-1MPa. The stainless collect design offers a secure connections that hold the tube firmly. Female banjo push in fitting can be fitted quickly and simply by pushing the tube directly into the connecting parts.
Push-in Tubing O.D: 6mm
Thread Size: M6 x 1
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: BT Plastic
Thread Material: Nickel Plated Brass
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: M6 x 1
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: BT Plastic
Thread Material: Nickel Plated Brass
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €1.045
6mm Tube to M6 Female Banjo Push in Fitting, M6 Thread to 6mm Female Banjo Pneumatic Connector, Female Banjo Push to Connect Fitting 6mm Tube M6 Thread, 6mm O.D Tube to M6 Thread Female Banjo Pneumatic Air Fitting, Female Banjo Push in Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PHF Female Banjo
