PH 10-02 | 10mm O.D Tubing, PT, R, BSPT 1/4 Thread Male Banjo | Push in Tube Fitting
10mm tubing PT 1/4 thread male banjo push in tube fitting is widely used to connect a tubing at a 90 degree angle to a female threaded port at a narrow space. The stainless collect design offers a secure connections that hold the tube firmly. Pre-coated Teflon threads are ready to use without additional sealing. Oval shape release sleeve and round shape release sleeve can be selection. Tightening on the top of the male banjo push in fitting with a flat wrench or a socket wrench at a confined space.
Thread Size: PT, R, BSPT 1/4
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
10mm Tube R 1/4 Thread Male Banjo Push to Connect Fitting, 10mm to PT 1/4 Thread Male Banjo Push in Fitting, Male Banjo Pneumatic Air Fitting 10mm Tube to BSPT 1/4, 10mm Tubing PT 1/4 Thread Male Banjo Push in Tube Fitting, Male Banjo Pneumatic Air Fitting
