PH 06-M5 | 6mm O.D Tube, M5 x 0.8 Thread Male Banjo | Push to Connect Fitting

6mm O.D tube M5 thread male banjo push to connect fitting is widely used to connect a tubing at a 90 degree angle to a female threaded port at a narrow space. The pneumatic plastic tubing can be PU tubing, teflon tubing, nylon tubing and PE tubing. Oval shape release sleeve and round shape release sleeve can be selection. Pre-coated Teflon threads are ready to use without additional sealing. Tightening on the top of the male banjo push in fitting with a flat wrench or a socket wrench at a confined space.

Push-in Tubing O.D: 6mm
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC

Price: €0.684

Ask for Quotation