PH 06-04 | 6mm O.D Tube, PT, R, BSPT 1/2 Thread Male Banjo | One Touch Tube Fitting
6mm tube PT 1/2 thread male banjo one touch tube fitting is widely used to connect a tubing at a 90 degree angle to a female threaded port at a narrow space. The stainless collect design offers a secure connections that hold the tube firmly. Male banjo pneumatic fitting is used for connecting pneumatic plastic tubing in compressed air circuits. The pneumatic plastic tubing can be PU tubing, teflon tubing, nylon tubing and PE tubing.
Push-in Tubing O.D: 6mm
Thread Size: PT, R, BSPT 1/2
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: PT, R, BSPT 1/2
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €2.783
Male Banjo Push to Connect Fitting 6mm Tube PT 1/2 Thread, R 1/2 Thread to 6mm Male Banjo Push in Fitting, Male Banjo Pneumatic Fitting 6mm Tube to BSPT 1/2, 6mm Tube PT 1/2 Thread Male Banjo One Touch Tube Fitting, Male Banjo Pneumatic Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PH Male Banjo