PH 06-01 | 6mm O.D Tube, PT, R, BSPT 1/8 Thread Male Banjo | Pneumatic Air Fitting
6mm tube BSPT 1/8 thread male banjo pneumatic air fitting is widely used to connect a tubing at a 90 degree angle to a female threaded port at a narrow space. Quick and simple tube connection and disconnection in tubing systems. Working pressure is 0-1MPa. The stainless collect design offers a secure connections that hold the tube firmly. Tightening on the top of the male banjo push in fitting with a flat wrench or a socket wrench at a confined space.
Push-in Tubing O.D: 6mm
Thread Size: PT, R, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: PT, R, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €0.806
6mm Tube to R 1/8 Male Banjo Push to Connect Fitting, Male Banjo One Touch Tube Fitting 6mm Tube BSPT 1/8 Thread, R 1/8 Thread to 6mm Male Banjo Push in Fitting, 6mm Tube BSPT 1/8 Thread Male Banjo Pneumatic Air Fitting, Male Banjo Push in Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PH Male Banjo
