PGE 1/2-1/4 | 1/2 Inch O.D Tube to 1/4 Inch O.D Tube Union Tee Reducer | Push in Fitting
1/2 inch O.D tube to 1/4 inch O.D. tube union tee reducer push in fitting is used for connecting pneumatic plastic tubing in compressed air circuits, which can be fitted quickly and simply by pushing the tube directly. To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. The stainless steel collet design ensures superior clamping with various types of tubing such as polyethylene, polyurethane, nylon and teflon.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
1/2 to 1/4 Inch O.D Tube Union Tee Reducer Push in Fitting, Push to Connect Fitting Union Tee Reducer 1/4" Tubing - 1/2“ Tubing, Union Tee Reducer Pneumatic One Touch Tube Fitting 1/2 Inch O.D. Tube - 1/4 Inch O.D. Tube, Air Connector Union Tee Reducer 1/4" - 1/2"