PG 1/2-1/4 | 1/2 Inch O.D Tube to 1/4 Inch O.D Tube Union Straight Reducer | Push in Fitting
1/2 inch O.D tube to 1/4 inch O.D. tube union straight reducer push in fitting is used to connect two tubings with different tubing diameter on both ends for an inline air connection, which is used for connecting pneumatic plastic tubing in compressed air circuits. The pneumatic plastic tubing connection can be polyurethane (PU) tube, polyethylene (PE) tube, nylon (nylon) tube and teflon (PTFE) tubing. Union straight reducer push to connect fitting can be fitted quickly and simply by pushing the tube directly.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
1/2 Tube to 1/4 Tube Union Straight Reducer Push in Fitting, Union Straight Reducer Push to Connect Fitting, 1/2 Inch Tube to 1/4 Inch Tube Tube Air Connector Union Straight Reducer, Union Straight Reducer Pneumatic One Touch Tube Fitting 1/2" to 1/4" Hose