PEG 3/8-1/4 | 3/8 Inch O.D Tube to 1/4 Inch O.D Tube Union Tee Reducer | Pneumatic Fitting
3/8 inch O.D tube to 1/4 inch O.D. tube union tee reducer pneumatic fitting connects three tubes with size down in both 90 degree directions. The tube size in the middle is smaller than the two inline tubes. One touch tube fitting can be fitted quickly and simply by pushing the tube directly. Quick and simple tube connection and disconnection in tubing systems. Working pressure is 0-1MPa. Oval shape release sleeve and round shape release sleeve can be selection. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
3/8 to 1/4 Inch O.D Tube Union Tee Reducer Pneumatic Fitting, One Touch Tube Fitting, Push to Connect Fitting Union Tee Reducer 3/8" Tubing to 1/4" Tubing, Air Tubing Fitting Union Tee Reducer 3/8 O.D. Hose to 1/4 O.D. Hose