PEG 1/2-3/8 | 1/2 Inch O.D Tube to 3/8 Inch O.D Tube Union Tee Reducer | Push in Tube Fitting
1/2 inch O.D tube to 3/8 inch O.D. tube union tee reducer push in tube fitting connects three tubes with size down in both 90 degree directions. The tube size in the middle is smaller than the two inline tubes. One touch tube fitting union tee reducer equipped with a convenient one touch release button that provides a easy and quick tubing connection and disconnection. To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
1/2 Tube to 3/8 Tube Union Tee Reducer Push in Tube Fitting, One Touch Tube Fitting Union Tee Reducer, Pneumatic Tube Fitting Union Tee Reducer 1/2 Inch Hose to 3/8 Inch Hose, Union Tee Reducer Tubing Fitting 1/2 - 3/8, Union Tee Reducer Push to Connect Air Fitting