PEG 1/2-1/4 | 1/2 Inch O.D Tube to 1/4 Inch O.D Tube Union Tee Reducer | Push in Fitting
1/2 inch O.D tube to 1/4 inch O.D. tube union tee reducer push in fitting is used for connecting pneumatic plastic tubing in compressed air circuits, which equipped with a convenient one touch release button that provides a easy and quick tubing connection and disconnection. The pneumatic plastic tubing connection can be polyurethane (PU) tube, polyethylene (PE) tube, nylon (nylon) tube and teflon (PTFE) tubing. Push to connect fitting union tee reducer can be fitted quickly and simply by pushing the tube directly. Working pressure is 0-1MPa. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
1/2 to 1/4 Inch O.D Tube Union Tee Reducer Push in Fitting, Push to Connect Fitting Union Tee Reducer, 1/2" Hose - 1/4" Hose Union Tee Reducer One Touch Tube Fitting, Pneumatic Ait Fitting Union Tee Reducer 1/2" Tubing to 1/4" Tubing