PE-5/32 | 5/32 Inch O.D Tube to 5/32 Inch O.D Tube Union Tee | Push to Connect Fitting
5/32 inch O.D. tube to 5/32 inch O.D. tube union tee push to connect fitting is used for connecting two tubes inline with three tube branches at a right angle. Pneumatic push in fitting union T is easy to install and release. The stainless steel collet design ensures superior clamping with various types of tubing such as polyethylene, polyurethane, nylon and teflon. Oval shape release sleeve and round shape release sleeve can be selection. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Push-in Tubing O.D: 5/32"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $0.713
5/32 to 5/32 Inch O.D Tube Union Tee Push to Connect Fitting, Pneumatic Push in Fitting Union T, One Touch Fitting Pneumatic Tube Connector Tee 5/32" Tubing, Union Tee Pneumatic Air Fitting 5'32" Hose O.D.
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PE Union Tee