PE-5/16 | 5/16 Inch O.D Tube to 5/16 Inch O.D Tube Union Tee | Push to Connect Fitting
5/16 inch O.D. tube to 5/16 inch O.D. tube union tee push to connect fitting is used for connecting two tubes inline with three tube branches at a right angle. Pneumatic one touch tube fitting union T can be fitted quickly and simply by pushing the tube directly. Working pressure is 0-1MPa. To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Push-in Tubing O.D: 5/16"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $0.974
5/16 Tube to 5/16 Tube Union Tee Push to Connect Fitting, Pneumatic One Touch Tube Fitting Union T, Push in Tube Fitting Union Tee 5/16" O.D. - 5/16" O.D., Tee Union Air Tube Fitting 5/16 Inch Tube to 5/16 Inch Tube
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PE Union Tee