SPU 10L | 10mm Tube to 10mm Tube Union Straight | 316L Stainless Steel Push in Fitting
316L stainless steel push in fitting - 10mm tube to 10mm tube union straight is made of 316L stainless steel body, 316L stainless steel collet and FKM (Viton) seal. The 316L inox pneumatic connector is widely used to connect PU tube, Nylon tube, PE tube, Teflon tube and so on.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316L Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316L Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: €1.00
10mm Tubing 316L Stainless Steel Union Straight Pneumatic Air Fitting, 10mm to 10mm Tube 316L Inox Pneumatic Push in Fitting Union Straight, 316L SS Push to Connect Fitting Union Straight 10mm Tube
Downloads