SPE 3/8L | 3/8 Inch Tube to 3/8 Inch Tube Union Tee | 316L Stainless Steel Pneumatic Fitting
316L stainless steel pneumatic fitting - 3/8 inch tube to 3/8 inch tube union tee is made of 316L stainless steel body, 316L stainless steel collet and FKM (Viton) seal. The 316L inox pneumatic connector is widely used to connect PU tube, Nylon tube, PE tube, Teflon tube and so on.
Push-in Tubing O.D: 3/8"
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316L Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316L Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: €1.00
3/8" to 3/8" Tube Union Tee 316L Inox Pneumatic Push in Fitting, 3/8 Inch Tube 316L Stainless Steel Union Tee Push to Connect Fitting, 316L Stainless Steel One Touch Tube Fitting Union Tee 3/8 Tube
Downloads