SPE 10L | 10mm Tube to 10mm Tube Union Tee | 316L Stainless Steel Pneumatic Fitting
316L stainless steel pneumatic fitting - 10mm tube to 10mm tube union tee is made of 316L stainless steel body, 316L stainless steel collet and FKM (Viton) seal. The 316L inox pneumatic push in fitting is widely used to connect PU tube, Nylon tube, PE tube, Teflon tube and so on.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316L Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316L Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: €1.00
10mm to 10mm Tube Union Tee 316L Inox Pneumatic Push in Fitting, 10mm Tubing 316L Stainless Steel Union Tee Push to Connect Fitting, 316L Stainless Steel Tube Connector Union Tee 10mm Tube
Downloads
