PK-3/8 | 3/8 Inch O.D Tube to 3/8 Inch O.D Tube Union Branch | Push to Connect Fitting
3/8 inch O.D tubing union branch push to connect fitting is used for in-line distribution of air to three tubing connections at a 90 degree angle to the supply line. Plastic one touch tube fitting union branch is used for connecting pneumatic plastic tubing in compressed air circuits. The pneumatic plastic tubing connection can be polyurethane (PU) tube, polyethylene (PE) tube, nylon (nylon) tube and teflon (PTFE) tubing. The stainless collect design offers a secure connections that hold the tube firmly.
Push-in Tubing O.D: 3/8"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €0.05
3/8 Tube to 3/8 Tube Union Branch Push to Connect Fitting, Plastic One Touch Tube Fitting Union Cross, Pneumatic Push in Air Fitting Union Branch 3/8" Tubing, Union Branch Pneumatic Tube Fitting 3/8 O.D. Tubing to 3/8 O.D. Tubing
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PK Union Branch